Manufactured with stainless steel tube and aluminum fin (Inox/Al). Compatible with all refrigerants (NH3, CO2, glycol, HFC, etc.). Modular design from 1 to 6 axial fans (Ø350, 450, 500, 560, 630, 800, 910). Fin pitch: 4-4,5-5-6-7-8-9-10-11-12 mm.

EC series evaporators are high efficiency industrial cubic evaporators, specially designed for flooded NH3 systems (both pumped and gravity). EC evaporators are of robust construction, high performance and highly resistant to corrosion.

Directly applicable to frozen chambers, refrigerated and preservation chambers in the fruit and vegetable, fish and meat industries, and distribution centers of the food industry. Range of standard evaporators with a high degree of flexibility for application in customized solutions.


- Pipe geometry. Two geometries available: 5/8" tube 50x50 in line and 7/8" tube 65.43 x 56.66 staggered.
- Pipe material. AISI 304 stainless steel (or AISI 316 on request).
- Aluminum fins. Optionally, they can be made of magnesium aluminum or aluminum with epoxy protection.
- Stainless steel screws.
- White thermo-lacquered aluminum fairing.
- Removable side covers. Coolant connections are easily accessible.
- Tray insulated with polyurethane as standard to avoid condensation. Tray made entirely of GRP (fiberglass reinforced polyester), a light and resistant material, rigid, resistant to corrosion and a good thermal, acoustic and electrical insulator.
- 'ErP ready' axial fans with IP54 or IP55 motors, depending on the model; motor protection with thermocontacts.
- The equipment is delivered pressurized and with Schrader + valves.


- Hot gas defrost in tray with check valve installed (optional).
- Water defrosting.
- Electric defrosting in coil and/or tray.
- Mixed defrosting.
- Heating rings on fans.
- Connection to textile sleeves.
- Shut-up System.
- EOS Streamer Plus.
- Suction hoppers.
- Discharge hoppers with overpressure dampers for defrost optimization.
- Reversed air direction (impeller fans).
- EC fans.
- Mixed flap steps.
- Epoxy protected sheets.
- Stainless steel fairing.
- Adjustable support legs (for equipment installation on the floor).

Contact with us

for any questions or clarifications you may have about our equipment.